Loudspeaker

Included inside the Box

Nexo PS15 (Pair)
20m Speakon Cable (Pair)

A high power system capable of producing 136dB Peak SPL, the Nexo PS15 Loudspeaker can be safely driven with up to 2000 Watts of amplifier power. Controlled by the new DTD Controller, the PS15 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems.

Components: LF 1 x 15″ (38 cm) long excursion Neodymium 8Ω driver. HF 1 x 2″ throat, 3″ Titanium diaphragm compression driver
+ Low Distortion, Constant Directivity Asymmetrical Dispersion HornHeight x Width x Depth: 675 x 434 x 368 mm (26.57″ x 17.08″ x 14.48″)
Weight: 28 kg (62 lbs)
Speakon Connectors: 2×4 pole in & loop through (switch passive to active inside)
Construction: Baltic Birch Ply finished with a textured black coating
Fittings: Handles 2 metal recessed pockets
Front Finish: Moulded dark grey metal grille
Flying Points: Two plates connecting with external accessories
Stand fittings: Built-in steel stand fitting (35mm / 1 3/8″
Frequency Response: 50 Hz – 18 kHz ±3 dB
Usable Range @-6dB: 47 Hz – 18 kHz
Sensitivity 1W @ 1m: 102 dB SPL Nominal / 99 dB SPL Wideband
Nominal Peak SPL @ 1m: 133 to 136 dB Peak
HF Dispersion: 50° to 100° Horizontal x 55° Vertical Rotatable Horn, 4 positions
Directivity : Q & DI: Q : 16 Nominal / DI : 12 dB Nominal ( f > 1.5 kHz )
Crossover Frequencies: 1.1 kHz Passive or Active (internally switchable)
Nominal Impedance: Passive 8Ω or Active LF 8Ω, HF 16Ω
Recommended Amplifiers: Passive 1000 to 2000 W 8Ω. Active LF 1000 to 2000 W 8Ω / HF 250 to 500 W 16Ω.
Important: Active mode only available on NXAMP (We stock Both NXAMP4x1 & NXAMP4x4 Controllers)
Electronic Controller: The PS15TD Controller-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes protections.
Using PS15-R2 & RS15 without a properly connected PS15 TDController-R2 will result in poor sound quality and can damage the components
Sub-bass: The PS15-R2 can be used without optional RS15 Sub-bass. Active two-way operation with RS15 is included in the PS15 TDController-R2. One RS15 matches 2 x PS15-R2, additional RS15 may be used for enhanced LF capability