Included inside the Box

Nexo LS600 Sub (Pair)
20m Speakon Cable (Pair)

A high power system capable of producing 138 dB Peak SPL, the Nexo LS600 Sub-Bass extends the usable range of the PS10-R2 Loudspeaker to 38Hz, providing exceptional performance and high power output in an extremely compact, lightweight package. Two LS600s are typically used with two PS10-R2 loudspeakers, additional units may be used for an enhanced effect. PS10-R2 and LS600 preset in the DTD Controller ensure cost-effective and simple system implementation while the NXAMP powered controller offers full network connectivity and the facility to combine PS10-R2/LS600 configurations with any other Nexo cabinets.

  • Weight: 30 kg (66 Lbs) net
  • Construction: Baltic Birch Ply & textured, polyurethane black coating.
  • Height x Width x Depth: 435mm x 688mm x 528 mm (17.12″ x 27.09″ x 20.79″).
  • Components: LF 1 x 15″ (38cm) long excursion Neodymium 8Ω driver
  • Fittings: Handles 2 Metal recessed pockets.
  • Flying Points: One plate connecting with external accessories.
  • Stand fittings: Internal Steel Stand Fitting on Top (35mm, 1 3/8″) allows pole mounting for 1 PS10-R2
  • Frequency Response:  40 Hz – 110 Hz ±3dB
  • Usable Range: @-6dB  38 Hz – 120 Hz
  • Sensitivity: 1W @ 1m 101 dB SPL Nominal.
  • Nominal Peak SPL @ 1m [b]: 135 to 138 dB Peak
  • Crossover Frequencies: 120 Hz Active through PS10 TD Controller-R2
  • Nominal Impedance: 8 Ohms.
  • Recommended Amplifiers: 1000 to 2000 Watts / 8 Ohms.
  • Electronic Controller: The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS). Use without a properly connected Controller will result in poor sound quality and may damage the components
  • Subbass: The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers. Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect
  • Speaker Cables: The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice

You may also be interested in...

Nexo PS15 Speaker
Nexo PS10 Speaker
Nexo PS10 R2 Speaker
Nexo PS8 Speakers

Get in touch with us about your next event

8 + 8 =

Office Hours


08:00 - 17:00
24HR Callout


24HR Callout

Contact us


(+44) (0)121 328 4777



Unit 5, 171 Lichfield Road,
Aston, Birmingham,
B6 5SN